A flagpole is the foundation of a banner, it holds the banner upright for spectators to see. Flagpoles have experienced various changes since individuals began flying banners. Preceding the modern unrest, flagpoles were made only from wood. In spite of the fact that some today still practice this specialty, most flagpole producers today use more sturdy materials.
Since the first known fabric flags date back to approximately 2,000 years ago, it can be argued that flagpoles also date that far back since a the flag needs to be attached to a pole of some kind for it to fly freely. What we do know is that the first known flagpoles were made from wood. A woodworker would find a tree that was straight and prune the limbs and suckers from it to produce a pole.
The pole was then inserted into the ground and a flag tied to the top. Over the years, the wood flagpole was improved by shaping and sanding the pole until it was straight and had a smooth finish. Once that process was complete, animal fat was applied to the entire pole over the course of several days. While the portion of these poles that was above ground would last for 50 years or more, the portion that was buried in the ground would rot.
Close to the turn of the twentieth century, steel banner shafts turned out to be more well known, in spite of the fact that they were frequently essentially the reused materials that had filled different needs. Ships poles were frequently repurposed as banner shafts.
Steel section poles used to house trolley lines were employed to make flag poles and eventually, sectional steel flag poles were manufactured for the purpose of flying flags. Wooden poles became obsolete. In the later 1920s, flag pole producers began constructing the long tapered poles so common today.
Producing progress in expelling aluminum shafts drove inevitably to the predominance of aluminum and aluminum compounds as the essential materials for making banner posts today. Aluminum is more flexible as an assembling material, and as creation procedures have enhanced, it has gotten to be far less expensive than steel.
Since the first known fabric flags date back to approximately 2,000 years ago, it can be argued that flagpoles also date that far back since a the flag needs to be attached to a pole of some kind for it to fly freely. What we do know is that the first known flagpoles were made from wood. A woodworker would find a tree that was straight and prune the limbs and suckers from it to produce a pole.
The pole was then inserted into the ground and a flag tied to the top. Over the years, the wood flagpole was improved by shaping and sanding the pole until it was straight and had a smooth finish. Once that process was complete, animal fat was applied to the entire pole over the course of several days. While the portion of these poles that was above ground would last for 50 years or more, the portion that was buried in the ground would rot.
Close to the turn of the twentieth century, steel banner shafts turned out to be more well known, in spite of the fact that they were frequently essentially the reused materials that had filled different needs. Ships poles were frequently repurposed as banner shafts.
Steel section poles used to house trolley lines were employed to make flag poles and eventually, sectional steel flag poles were manufactured for the purpose of flying flags. Wooden poles became obsolete. In the later 1920s, flag pole producers began constructing the long tapered poles so common today.
Producing progress in expelling aluminum shafts drove inevitably to the predominance of aluminum and aluminum compounds as the essential materials for making banner posts today. Aluminum is more flexible as an assembling material, and as creation procedures have enhanced, it has gotten to be far less expensive than steel.
About the Author:
Information available on flagco.com, and afterward order flagpoles for your organization.
No comments:
Post a Comment