Tuesday, May 1, 2018

For Constructors Of Retaining Walls Huntsville AL Is Worth Visiting

By Carl Thompson


Most people view retaining walls as effective structures that offer support to the soil. They are also important in prevention of soil erosion on a given area. Most people are not familiar with the fact that retaining walls can also be used for beauty purposes. They can be used to create and improve the beauty of outdoor living spaces and also integrate multi-use spaces. When one needs to make retaining Walls Huntsville AL offers the perfect location to visit.

These walls usually vary in size from small structures that can only rise one feet up to huge structures that can rise several meters into the sky. Planning and constructing the small structures is much easier and achievable, but the large ones usually present not only a huge risk, but a huge challenge as well. Big structures will need a civil or structural engineer to plan and oversee the construction.

If one is planning to construct a wall that is over four feet high, they need to check with the local authorities to ensure they are following the local construction codes. The standards of constructing a retaining wall are usually administered by the local government authorities. If one is unfamiliar with these standards it may result to violation which may land them into trouble. The first condition to observe is to ensure that one has a permit before any construction is started.

There are several different materials that can be used to construct this structure. The material used should be dictated by the purpose the wall is supposed to serve. The best construction materials to use are stones and manufactured blocks because they offer several advantages. First of all, they offer a consistent and beautiful view of the structure. Thus, besides being utilitarian, they offer beauty.

Additionally, manufactured blocks and stones provide the required strength in the structure. This makes it strong enough to hold the pressure applied on it by the retained soils. This way the wall is the structural integrity of the wall is achieved. The other importance is that it keeps away guesswork during the installation process. Besides achieving level using stone is much easier compared to other building materials.

During construction it is important to ensure proper drainage is included. In the case where a slope is dropping to the structure then there is need to include additional drainage. Fabric-covered drainage pipes and gravel need to be added at the base of the structure for one to achieve proper drainage. The fabric serves the purpose of preventing the pipe from clogging. If there is no proper drainage, a lot of work will be needed to unclog the pipes if they get clogged.

Choosing a good design is important because it adds beauty to the structure. It is therefore advisable to conduct research about the available designs. There are certain features such as adding curves into the length may help ensure a great design is achieved. When one follows straight line along the length of the wall usually leads to a boring design.

Some of the final touches to use include adding cap blocks at the top of the structure. The cap blocks can be held in place using masonry adhesives. Once the structure has been completed, it should be allowed time to dry and cure completely, before it is backfilled with soil.




About the Author:



No comments:

Post a Comment